Slee-Carrier ™ swing out tire carrier

As we all know the stock location of the spare tire and the US Spec 2″ receiver leaves a lot to be desired when going off-road. The Slee-Carrier addresses both these concerns in a well executed swing out carried that pivots on dual tapered bearings.

The Slee-Carrier accepts standard size tires and comes with additional backup light mount tab and antenna bracket.

Rear quarter view showing tire carrier

Rear view showing new 2″ receiver & tire carrier. The 2″ receiver bolts to the rear cross member and used the stock 4 holes, two at the bottom, and two newly drilled holes. The receiver is not rated for towing.

The tire carrier swings out on a spindle bracket that bolts to the frame underneath the rear plastic molding.

Tire carrier in the open position. A spring loaded latch connects with a latch plate to keep the carrier open.

Close up of the spindle, additional backup light and open position latch.

Close up of the new bolt on receiver. The receiver sticks out 5″ to the back. The top part serves a nice step.

Close up of latch in OPEN position.

Rear view of the spindle. A 2″ hole was cut in the top of the plastic molding to allow the spindle to stick through.

Latch to lock the carrier down.