SLEE- Rear Bumper, Tire Carrier and Ladder – ’91-97 Land Cruiser / Lexus LX 450


SKU: SOK1272 | MPN: SOK1272 | Categories: , Tag:

In Stock!

Frequently Bought Together

SLEE - Maxtrax Brackets for Slee Rear Bumper

  • Allow installation of two Maxtrax behind tire on tire carrier
  • Supplied with installation hardware
  • Includes 2 straps
  • Passivated Stainless Steel
  • Designed to work with Slee rear bumper for 80, 100, and 200 Series Land Cruiser
  • Bracket is not intended for legacy bumpers (tubular style swing outs)

SLEE - Jerry Can Basket and Strap

  • Accepts three jerry cans
  • Interior dimensions of basket - 21.5" x 14.4"
  • Supplied with strap to tie down cans
  • Additional Holes for a cable lock

SLEE - 2" Receiver for SLEE Rear Bumper - '91-97 Land Cruiser / Lexus LX 450

  • 2"  Receiver
  • Requires cutting and drilling
  • Supplied with all new mounting hardware
  • Powder coated black


SLEE - 2" Receiver Adapter - '91-97 Land Cruiser / Lexus LX 450

  • Supplied with installation hardware
  • Attaches to existing mounting provisions
  • Not rated for towing
  • Designed to work with or without Slee rear bumper *see notes*


SLEE - Rotopax Mount Hardware Kit for Slee Bumpers

  • Mounts 4 Gallon Rotopax to new style Slee Rear Bumper
  • Includes mounting hardware

Rivet Nut Tool - M8

Out of stock

Drill Bit - 17/32"

  • Used for installation of M8 & M10 Rivet Nuts
  • Requires drill with 1/2" chuck
  • 1/2" Shank

SLEE - Hi-Lift Mount

  • Allows installation of Hi-Lift Jack behind tire on tire carrier
  • Supplied with installation hardware
  • Designed to work with current Slee rear bumpers
  • Powder coated black

SLEE - ARB Jack Mount

  • Allows installation of ARB Jack behind tire on tire carrier
  • Supplied with installation hardware
  • Designed to work with current Slee rear bumpers
  • Bracket is made of Passivated Stainless Steel

SLEE- Rear Bumper, Tire Carrier and Ladder – ’91-97 Land Cruiser / Lexus LX 450


The Slee bumper and tire carrier is a bolt on installation that will fit vehicles from 1991 to 1997. No drilling or cutting is required on the frame. The bumper is formed from 3/16″ laser cut steel. The bumper is finished with final 60% gloss powder coat finish on top of a zinc primer. The pre-treatment includes baking to remove all oil, phosphate washing, sandblasting and then a powder coating is applied. The bumper now features plate style carriers. The tire carrier can be used as an accessory mount if the tire mount is removed. The tire carrier accepts a 4 Gallon Rotopax can (optional hardware required). An optional Maxtrax Mount kit can be purchased if the user would like to store 2 x Maxtrax recovery boards on the carrier.

Exploded View of rear bumper showing all parts.

Bumper with Tire, 4 Gallon Rotopax and Hi-Lift Installed

Bumper with Tire, Maxtrax and Hi-Lift Installed

Slee have designed a new proprietary latch system to close the carriers. A single latch secures both carriers shut. The latch is designed to be easily operated for both opening the closing. The latch is designed to position the opening hand in a natural orientation to make opening and closing easy. The finger tab positions the U-bolt in the latching position to prevent finger pinching risks. The handle on the latch stays in the upright position to make it easier to close. Stainless Steel safety pins keep the carriers closed in the unlikely event that the latch fails, or the user forgets to close the latch.

Single Proprietary Latch for both carriers

Latch in open position. T-handle Safery Pin

Easy to use finger tab to locate U-Bolt

Each carrier is held open with a gas strut that locks upon opening to ensure that the carriers does not accidently close when vehicle is off-camber. This does require the user to unlock the carrier before closing. If users do not require the locking feature, the locking collar can be removed. The gas struts also aid in closing the carrier and are located such that the carrier does not fly open as soon as the latch is released. Once the latch is released, the safety pin is pulled and the carrier is opened using the T-handle on the safety pin.

Locking Gas Strut

Swing-out carriers pivot on large 1.75″ spindles with servicable roller tapered bearings to ensure smooth opening even with heavy loads on the the carriers. A propriety cap seals the hub and allows for easy removal and servicing of the bearings. A grease zerk allows for greasing of the bearings without removing the carriers. Side tubes attached to the wings offer quarter panel protection.
Carrier pivots and side quarter panel protection

Bumper is supplied with LED license plate light and mount located on the ladder/accessory carrier. An optional receiver can be purchased to install through the bumper.

A bolt on hi-lift mount or ARB lift mount are optional that attach to the tire carrier. The tire mount can be removed should the user want to modify the swing-out for a custom application. The carrier has multiple holes for easy bolt on applications. The tire carrier is designed to accommodate up to a 37″ tire, with adjustability on the width.

The ladder / accessory swing-out also features a variety of mounting holes for customization. The swing-out accepts all our standard accessories like the Jerry Can Basket or Rotopax Mount.

The bumper mounts to the frame using integrated and bolt on brackets. The rearmost bracket bolts to the bottom of the frame using existing holes in the frame. The bracket is also bolted through the frame in a horizontal direction.


  • Easy to use proprietary latch system
  • Single latch for both carriers
  • Safety Locking pins for keeping carriers closed
  • Gas assist struts that aid in opening and closing of carriers
  • Locking gas assist struts
  • Storage for 2 x Maxtrax (Optional Mount) or 4 Gallon Rotopax Can
  • Plate style ladder to allow for easy accessory additions
  • Tire carrier can be used as a accessory carrier


  • 37″ Tire capacity
  • Factory 2″ receiver can be re-used
  • Optional 2″ receivers available
  • Hi-Lift Jack Mount sold separately
  • ARB Hydraulic Jack mount sold separately
  • LED License plate light
  • Fully supported wings for superior strength
  • 3/8″ Plate steel wing supports
  • Integrated Recovery points that transfer load to frame
  • 3/4″ Thick recovery points for increased side load strength
  • Rattle Free
  • Adjustable tire mount for different offset wheels

Additional information

Weight 350 lbs
Dimensions 81 × 38 × 16 in


Item Weight: 250

Product Documentation and Media

If unsure, please confirm compatibility before ordering.

Make Model Year
Make Model Year
Lexus LX 450 1996 - 1997
Toyota Land Cruiser 80 Series 1991 - 1997