SLEE – Blueberry Front Bumper – ’98-07 Land Cruiser / Lexus LX 470


SKU: SOK1268-old | MPN: SOK1268-old | Categories: , Tag:

Out of Stock

Email when back in stock

SLEE – Blueberry Front Bumper – ’98-07 Land Cruiser / Lexus LX 470


In 2007 we built the BlueBerry truck. The truck was a Solid Axle Swap on a 1998 Land Cruiser. The front bumper was a one-off custom that we did to accomodate a M12000 Warn winch, yet give us great approach and departure angles. The looks of this bumper created quite a stir in the 100 community, and now after a long development process, we can finally offer the “BlueBerry” bumper for sale. The bumper shares some of the design clues from the earlier bumper, but we could not duplcate it entirely due to the cut fenders and solid axle swap we did on the BlueBerry. However the premise is still the same. Great approach angles, yet still fit a large winch. Excellent recovery points, strong wings and built to take a beating.

Constructed from 3/16″ plate with 3/8″ mounting flanges

3/4″ thick recovery points directly connected to vehicle frame

Wing gussets for additional strength

Light tabs on tube allows for auxiliary light installation.


  • Bumper is made from 3/16″ steel with 3/8″ Frame mount brackets.
  • Bolt on design with minor frame modifications1 .
  • Bumper and winch mount is a single unit to prevent bumper from moving when winching.
  • Recovery points forms part of the frame mounting in order to transfer recovery forces directly to the frame.
  • Recovery points are doubled up to a total of 3/4″ thickness to prevent bending during side pulls.
  • Recovery Points accept all D shackles with 3/4″ pins.
  • Bumper attaches with a total of 12 bolts. The bumper is supplied with all new hardware and all 14mm bolts are oe Toyota bolts.
  • Low profile design that can still accommodate up to a M12000 Warn Winch. Will also fit most low profile winches with a Warn Bolt Pattern
  • All welding is done by the pulse weld method by certified welders.
  • Boxed wing sections for extra strength.
  • 2″ Upper tube for grill protection
  • 2 Light mounts provided on top of tube
  • Supplied with all new hardware as well as license plate frame and solenoid brackets for Warn winches2
  • The bumper is finished with 60% gloss black powder coat finish. Pre-treatment includes baking to remove all oil, phosphate washing and sandblasting

Light Bracket now available!

  1. Notes:
  2. Required drilling of 4 holes and cutting of the front frame horn caps.
  3. Solenoid bracket will not work for Warn M12000 Winch. Solenoid has to be relocated to behind grill or under hood.
  4. If this bumper is fitted to a LX470, the side marker lights need to be converted to marker / indicator lights. The part numbers below are for the 100 Series Land Cruiser Marker light housings, bulb sockets and pigtails. These can be used and wired into the LX470 to have a dual element bulb that can function as marker and indicator light

81510-60500 – Lamp Assembly – Required – 1
81520-60370 Lamp Assembly – Required – 1
90980-11020 Bulb Housing – Required – 2
82998-12440 Terminals – Required – 6


Additional information

Weight 230 lbs
Dimensions 81 × 38 × 16 in


Item Weight: 134

If unsure, please confirm compatibility before ordering.

Make Model Year
Make Model Year
Lexus LX 470 1998 - 2007
Toyota Land Cruiser 100 Series 1998 - 2007