The Slee Dual Battery Circuit Board uses color changing LED’s to conveniently display the status of each battery.
The small circuit board allows for easy installation into any Toyota switch blank (as shown above). Generally this kit is recommended for an install where an IBS system isn’t used.
LED Color Status Chart
|OVERCHARGING – Voltage at battery is greater than 14.7v
|CHARGING – Battery is receiving normal charging voltage – 13.1v – 14.6v
|BATTERY OK – Battery is charged – 12.1v – 13v
|BATTERY REQUIRES CHARGING – 11.5v – 12v
|BATTERY DISCHARGED – 3v – 11.4v
|LESS THAN 3v – No battery present (applies to aux battery hook up only). This enables the two LED system to be used without an auxiliary battery present. This prevents a RED flashing LED on the AUX LED. The system will flash the LED during the first second that power is first applied. This is a LED check. After 1 second if the voltage remains below 3V then it assumes no battery is present and stops flashing.
|5 × 13 in