Slee Rear Bumper with Dual Carriers
The Slee rear bumper for the 100 Series Land Cruiser (and LX470) is now in it's 2nd revision and due to multiple requests we now offer it with dual swingouts. The tire has been moved to the right, and the setup will accomodate up to a 35" tire.
The bumper and carriers are sold individually.
Bumper Features
-
Complete bolt on solution using existing frame holes and captured nuts. Bumper attaches with a total of 12 bolts. The bumper is supplied with all new hardware and all 14mm bolts are oe Toyota bolts.
-
Bumper has two spindles pre-installed for the addition of swing out carriers later. Spindles are covered by a durable plastic sleeve to prevent corrosion of the spindles.
- Stainless steel slide strips to prevent scratching by carrier safety pins
-
All welding is done by the pulse weld method by certified welders.
-
No drilling required.
-
Bumper channel is made from 3/16" metal. The mounting system is 3/8" metal.
-
Wrap around wings with 3/8" mounting flanges
-
Integrated 2" receiver (not rated for towing)
- Heavy duty recovery points that are an extension of the 3/8" mounting system. Loads on the recovery points are transfered directly to the frame.
-
The bumper is finished with 60% gloss black powder coat finish
-
Pre-treatment includes baking to remove all oil, phosphate washing and sandblasting
Tire Carrier Features
-
Tire carrier accomodates up to 35" tire.
- Hi-Lift mount included
- Antenna mount included with 1/2" hole
- Backup Light or 2nd antenna mount with 1/2" hole.
-
Stainless Steel spring loaded locking pin to keep tire carrier open and also serves as a 2nd safety pin when closed.
- 1.75" spindle with serviceable bearings used on swing-out carrier.
- Threaded hub cap to make bearing service and removal easier.
- Grease zirk on hub for easy lubrication.
- High quality Hella license plate light with harness
- Tire carrier mounting flange is adjustable for different off-set wheels.
- Over the center latch for secure closing.
- Tire carrier design has been tested with 39" tire.
- Rattle free design utilizing nylon pads and rubber stops.
Ladder Carrier Features
The Ladder Carrier is intended to be a base for attaching custom holders or accessories. A range of accessories will be developed and offered to the market.
- Sturdy ladder for access to the roof.
- Flat ladder wrungs for easy and secure step.
- Features the same threaded cap as the tire carrier for easy removal.
- Ladder wrungs are pre-drilled for easy attachment of accessories.
Part #: SOF1128
$1395.00
Carriers sold separate
RHD Tire Carrier
Part #: SOF1129
$645.00
LHD Ladder
Part #: SOF1130
$445.00
