Similar in concept and execution but
fitted to a 1995 80 Series, these Sliders were made to accept an outboard runner
that serves as a running board. The outside runner is capped with anti-skid
material and bolts on with 4 bolts.
shows the dual sliders in position
picture showing outboard slider bolted to inside slider.
Another view of the sliders installed.
shows the wrap around bracket that was made to slip under
the catalytic converters. This is not the ideal due to
loss of ground clearance, but unless you relocate the cats
there is no other option viable option. The brackets has got holes
drilled for the addition of a mini skid plate for the cats.
shows the improved mounting method using custom bent U bolts
that wrap the frame.